System settings
91
or
Trailed machine
• Trailed machine
In this screen, you can run the following settings:
• Offset connecting point with respect to the tractor track (A)
• Distance from signal receiver to hard wheel axle (C)
• Distance from hard wheel axle to hard spreading discs (B)
The distance from signal receiver to spreading discs plus 1/3 x
working width. The control system can now calculate the correct
speed reduction for subsequent spreading on the headland and
during gored spreading.
Correction time
Correction time for opening and closing the dosing; the time can be
adjusted, shorter for a low application rate and longer for a high
application rate.
S
Selector for drawn machine
To Next Page
