Vicon Motion Systems Page 3 of 12
Check what's in the box
Check what's in the box
Before setting up your Vicon Vantage system, check
that you have all the necessary components, which are
described in this section.
For a list of components supplied with your specific Vicon system, see your
shipment Bill of Materials.
Hardware
Vicon Vantage cameras (V16, V8, V5)
Vicon’s newest optical cameras with custom-engineered
sensors and lenses, high-power strobes, on-board
processing, Gigabit Ethernet connectivity and a new
design. Available in high-performance resolutions up to
16 megapixels at 120 fps full-frame capture speeds.
PoE+ switch
The supplied PoE+ switch provides the power source and
connectivity for your Vicon Vantage system.
Vantage cameras require a PoE+ switch.
Vicon Lock and Vicon Bonita cameras can also connect to
a PoE+ switch.
Vicon Lock+
Vicon’s optional connectivity device for the Vantage
system. The Vicon Lock+ synchronizes with your Vantage
and Bonita cameras. It also provides interfacing to third-
party analog devices, timecode, genlock and sync out
functionality.
To Next Page
Loading...
