5
Fitting the Harness
3.
Product Disposal
CORRECT DISPOSAL OF THE PRODUCT
Waste electrical products should not be disposed of with household waste.
Please recycle where facilities exist. Check with your local authority or retailer
for recycling advice.
The battery contains material which is hazardous
to you and the environment. It
must be removed and disposed of separately at a facility that accepts lithium-ion batteries.
Refer to Briggs & Stratton 82V Lithium Ion Battery and Charger Operator's Manuals
for further information relating to battery and charger disposal.
In the rare case a battery is damaged & any of the contents leaks or comes into contact with
a persons skin, eyes, or is ingested, follow the first aid instructions inside the battery & charger
manual. Seek further medical attention immediately.
Emergency Contact
ASSEMBLY PROCEDURES
This product requires assembly.
• Carefully remove the product and any accessories from the box. Make sure that all items
listed in the packing list are included. Refer to page 3.
• Do not discard the packing material until you have carefully inspected and ensured product
is in correct operating condition.
WARNING
Do not attempt to modify this product or create accessories not recommended for use with
this product. Any such alteration or modification is misuse and could result in a hazardous
condition leading to possible serious personal injury.
Do not operate the machine unless assembly is complete including guards, handles &
harness.
Unpacking
The harness is intended to help you work safely while maintaining correct ergonomic position
when using the grass trimmer.
• Hook the strap into into the harness connection
point (1).
• Slip the strap over the shoulder.
• Set the length of the shoulder strap in such a way that
the trimmer head runs parallel to the ground. In order to
establish the optimum length of the strap, you should
then make a few swinging movements without starting
the product.
1
NOTE: Refer to Fig. 2.
Fig. 2
To Next Page
