Victa V127 - Control Overview

Not for
Reproduction
9
CONTROLS
SYMBOL FUNCTION INSTRUCTIONS
Stop engine
Move the control to this position to
stop engine.
In many applications, this will be a
position of the throttle control lever
(refer to the Operator’s Manual of the
product for confirmation).
Engine Speed - Fast
Move the control to this position to
run the engine at maximum speed.
In many applications, this will be a
position of the throttle control lever
(refer to the Operator’s Manual of the
product for confirmation).
Engine Speed - Slow
Move the control to this position to
run the engine at minimum speed.
In many applications, this will be a
position of the throttle control lever
(refer to the Operator’s Manual of the
product for confirmation).
Start engine*
Use this control to start the engine,
following the procedure in the
Operation section of this manual.
This will either be on the starter
handle (for pull-cord start engines) or
also on the start button (for electric
start engines)
Prime*
Push this button the required number
of times to prime the engine prior to
cold starting.
* Where fitted
START