19
MAINTENANCE MAINTENANCE
1. Open the air filter assembly cover.
2. Remove (both of) the foam element(s).
3. Wash the foam element(s) in liquid detergent and water. Squeeze dry the foam element(s)
in a clean cloth.
• If the build-up of dirt cannot be removed from the air filter element by washing, the
air filter element should be replaced. Use only a replacement air filter element designed
specifically for the air filter on your Victa engine. For a dual stage filter, replace both foam
elements at the same time.
4. Saturate the foam element(s) with clean engine oil. To remove the excess engine oil,
squeeze the foam element in a clean cloth.
5. Install the foam element.
• Ensure that the foam air filter elements are in the correct orientation. There should be no
gaps at the corner of the air filter element.
6. Close the air filter assembly cover.
Check the gap with a spark plug gap gauge. If necessary, reset the gap. Install and tighten
the spark plug to the recommended torque.
Note: In some areas, local law requires using a resistor spark plug to suppress ignition
signals. If this engine was originally equipped with a resistor spark plug, use the same type for
replacement.
• Allow muffler, engine cylinder and fins to cool before touching.
• Remove accumulated debris from muffler area and cylinder area.
• Inspect the muffler for cracks, corrosion, or other damage. If damage is found, install
replacement parts before operating.
• Remove the deflector or the spark arrester, if equipped, and inspect for damage or carbon
blockage. If damage is found, install replacement parts before operating.
Note: In some areas, local law requires use of a spark arrester, maintained in effective working
order, on the muffler. If this engine was originally equipped with a spark arrester, use the
same type for replacement.
WARNING
Running engines produce heat. Engine parts, especially muffler, become extremely hot.
Severe thermal burns can occur on contact.
Combustible debris, such as leaves, grass, brush, etc. can catch fire.
Cleaning & Maintaining Foam Air Filter Element
SERVICE SPARK PLUG
SERVICE EXHAUST SYSTEM