16
MAINTENANCE
CARBURETTOR AND ENGINE SPEED
Never make adjustments to the carburettor or engine speed. The carburettor was set at the
factory to operate efficiently under most conditions. Do not tamper with the governor spring,
linkages, or other parts to change the engine speed. If any adjustments are required contact
an authorised Victa service dealer for service.
NOTICE:
The equipment manufacturer specifies the maximum speed for the engine as installed
on the equipment. Do not exceed this speed. If you are not sure what the equipment maximum
speed is, or what the engine speed is set to from the factory, contact an authorised Victa
service dealer for service for assistance. For safe and proper operation of the equipment, the
engine speed should be adjusted only by a qualified service technician.
To Next Page
Loading...