8
with “#” mark.
S: The calculator prints but does not clear the accumulator.
28. [T] Total key
Prints and clears the accumulator. When this key is pressed with the switch in the
“GT” position, the result is accumulated automatically in the grand total memory.
29. [MT] Memory Total key
Prints the memory total and clears the memory. (Separate from the GT Memory)
30. [MS] Memory Subtotal key
Prints but does not clear the memory.
31. [M-] Memory Minus key
Subtracts the amount entered from memory. If there is a live calculation pending,
the Memory minus key will complete the calculation and subtract the amount from
Memory.
32. [M+] Memory Plus key
Adds the amount entered into memory. If there is a live calculation pending, the
Memory plus key will complete the calculation and accumulate the result to
Memory.
7. CALCULATION EXAMPLES
1. ADDITION / SUBTRACTION
Print
Rounding Decimal Digits GT
P 5/4 F 12 .
Calculation Enter Display Paper
2 + 3.1415926 - 6 = ? 2 [+] 2.
3.1415926 [+] 5.1415926
6 [−] - 0.8584074
[T] - 0.8584074
2. ADDITION / SUBTRACTION IN ADD MODE
Print
Rounding Decimal Digits GT
P 5/4 A 12 .
2. +
3.1415926 +
6. −
− 0.8584074
Τ
To Next Page
Loading...
Need help?
General
