Victoria Arduino ADONIS 2 gruoups

38
EN
INDEX
TECHNICAL CHARACTERISTICS ...................... 37
1. GENERAL REMARKS ON
THE CONSIGNMENT
.......................................... 39
1.1 SAFETY REGULATIONS .................................................................... 39
2.
DESCRIPTION ..................................................... 41
2.1 ACCESSORIES LIST ......................................................................... 42
3.
TRANSPORT AND HANDLING ........................... 43
3.1
APPLIANCE IDENTIFICATION............................................................ 43
4.
INSTALLATION AND PRELIMINARY
OPERATIONS
...................................................... 44
5.
ADJUSTMENTS TO BE MADE BY
A QUALIFIED TECHNICIAN ONLY
...................... 46
5.1 FILLING BOILER MANUALLY .............................................................46
5.2
PRESSOSTAT / PUMP ADJUSTMENT ................................................ 47
5.2.1
PUMP ADJUSTMENT ...........................................................................................47
5.2.2
PRESSOSTAT ADJUSTMENT ...............................................................................47
5.3 HOT WATER ECONOMISER ADJUSTMENT ...................................... 48
5.4
CLOCK BATTERY REPLACEMENT .............................................................49
6. USE ...................................................................... 50
6.1 TURNING THE MACHINE ON ............................................................50
6.2
LED SWITCH ON .............................................................................. 52
6.3
BUTTONS KEY (Selection Configuration) .............................................52
6.4
STEAM FLOW ADJUSTMENT ............................................................ 53
6.4
ADJUSTING THE TURBOCREAM NOZZLE (If Fitted) ..........................53
6.4 ADJUSTING THE AUTOSTEAM NOZZLE (If Fitted) ............................. 54
7. PROGRAMMING .................................................. 55
7.1 KEY ...................................................................................................55
7.2
PROGRAMMING ..............................................................................................55
8. CLEANING AND MAINTENANCE........................ 65
8.1 SWITCHING OFF THE MACHINE ...................................................... 65
8.2
CLEANING THE OUTSIDE OF THE MACHINE ................................... 65
8.3
CLEANING THE STAINLESS COFFEE-HOLDERS .............................. 65
8.4
CLEANING THE UNIT WITH THE AID OF THE BLIND FILTER ............66
8.5
CLEANING FILTERS AND FILTER-HOLDERS ....................................66
9.
MACHINE FUNCTION MESSAGES .................... 67