67
•
The long coffee key for each group will flash and
when pressed, the display will show the number of
wash cycles carried out for that particular group.
• Press the keys to view the other functions.
•
Press the
key to quit the display mode.
AUTO.CLEAN.CYCLE
DOSE PROGRAM.
DELIVERY COUNT
ON-OFF PROGRAM.
ENERGY SAVING
CUP-WARMER PRO.
DATE/TIME
POURING TIME
SETPOINT PRESS.
HISTORICAL ALARM
MAINTENANCE
LANGUAGE
TEMPERATURE
LIGHT ADJUST
Operation to be carried out EXCLUSIVELY by a
Qualified Technician. Adjustment by NON quali-
fied technicians can invalidate the guarantee.
7.3 PROGRAMMING
(TECHNICIAN Mode)
To enter the Technician Mode programming environ-
ment, hold down the
key for at least 10 sec-
onds and wait for the acoustic signal.
followed by:
• The display will read:
• Press and the display will read:
•
The
central key in each unit
will begin to flash
on and off. Insert the blind filter () into
the filter-holder, add half a dose of PULICAFF
and attach the filter-holder into the unit where you
intend to carry out the automatic cleaning cycle.
It is possible to wash more than one group at the
same time.
To Next Page
Loading...
Need help?
General
