• Press the key to start the unit automatic
cleaning cycle. The display will read:
wher
e 1L indicates that the cleaning cycle has
been activated within the 1st unit. Once the
cycle of 15 deliveries of 5 seconds each, with a
10-second pause between each delivery, has been
completed the selected unit
key will begin to
flash on and off again and the display will read.
•
Eliminate any residues of
PULICAFF from the blind
filter and press
the rinsing cycle starting up
key of the unit or units where the cleaning cycle
has been effected. The letter R will remain on the
display like the key
. Once the rinsing cycle of
the selected unit or units has been completed, the
display will read.
• The display will read:
• Press , and the display will read:
All
the programmable keys will start to flash on
and off.
•
Press the coffee
key you wish to program; the dis-
play will read:
Followed by the dose
amount already set by the
manufacturers.
•
Vary the dose, by pressing the buttons
.
•
By pressing the cof
fee key you want to program,
delivery will be started up (in the meantime all the
other keys will turn off).
• Once you have the required dose, press the con-
tinuous coffee key
to stop pouring.
• The display will show the new dose amount which
can still be changed by means of the keys .
• Press the key to confirm the programmed
dose.
• Press the key to cancel programming.
•
The programmed coffee key will switch off.
To Next Page
Loading...
Need help?
General
