69
• Press the
button and make sure that it lights
up. The display will read:
The value X.X is the default setting.
Press the
keys to vary the hot water delivery
time.
•
If a new sampling
is desired press the
button
again.
Delivery starts. When the
desired dose has
been reached press the button again
.
•
The display will show the new dose value set which
can still be changed by pressing the
keys
.
• Press the o passare ad una successiva se-
lezione per concludere l’operazione.
• Press the RESET key to cancel programming.
The
button will turn off.
• Press the
button and make sure it lights up.
In those models
provided with a temperature probe
(optional) the control unit automatically recognizes
the presence of the probe and the display will read:
followed by the temperature
set previously by the
manufacturer.
Press the
keys to vary the temperature of the
beverage you want to heat. When the desired tem-
perature has been reached, the steam delivery will
automatically stop.
•
In the standard version
(without temperature probe),
on pressing the
the display will read:
followed by the amount already set by the manufac-
turers.
Press con the
keys to vary the steam delivery
time .
• If a new sampling is desired press the
button
again.
Delivery starts. When the desired dose has been
reached press the button again
.
• The display will show the new value set which can
still be changed by pressing the
.
•
Press the
key or go on to a further selection
to terminate the operation.
•
Press the
key to cancel programming.
The
button will turn off.
• When the display reads:
To Next Page
Loading...
Need help?
General
