transferring the set dose to other units is possible by
pressing the key. The display will read:
at this point, the
continuous coffee keys
of the
second, third and fourth groups will flash as shown
in
• Selecting the continuous key
(the key will
stop flashing and remain lit) will transfer the values
programmed for the first group to the other groups,
one at a time.
•
Press the
key to confirm.
At this point the display will read:
•
Press the
or key to exit without confir-
mation.
• When the display reads:
we mean to recall the standard dose values.
•
Press the key.
The display will read:
At this point, the continuous coffee keys
will
begin to flash.
• Select one or more continue keys (the key or keys
selected will remain lit up).
The key or keys will recall the selected unit’s stand-
ard doses.
•
Press the
key to confirm.
To Next Page
Loading...
Need help?
General
