EAGLE ONE PRIMA | LIBRETTO ISTRUZIONI - USER HANDBOOK - MANUEL D’INSTRUCTIONS | 66
E
The machine must be set to
“O” power before any cleaning
operations are performed.
• Avoid to clean the
machine using water jets
or standing it in water.
• Do not use solvents,
chlorine-based products
or abrasives.
9.1
BODY MACHINE
CLEANING
Work area cleaning
• Remove the worktop, lifting
it up from the front and
sliding it out.
• Remove the water
collection dish underneath.
• Clean everything with hot
water and cleansers.
External plates cleaning
• To clean all the chromium-
plated areas, use a soft,
damp cloth.
9.2
CLEANING THE
COFFEE-HOLDERS
Cleaning the coffee-holder
once a week:
• Turn the screw placed in
the centre of the coffee-
holder.
• Slide the coffee-holder out
and check that its holes
are not obstructed but
clean. If obstructed, clean
as described.
9.3
CLEANING WITH
THE BLIND FILTER
The machine is pre-set for
cleaning the delivery unit
with a specific washing
powder. Carrying out a
washing cycle at least once
a day with special cleansers.
˂ˡ˖˘˧˛˘Ё˟˧˘˥ʠ˛ˢ˟˗˘˥˛˔˦
been removed, repeat
delivery operations a few
times to eliminate any
cleanser residues.
To carry out the washing
procedure, proceed as
follows:
1 Substitute the filter with
the delivery unit blind fil-
ter.
2 Fill it with two spoonfuls of
special cleanser powder
and insert it into the unit
filter-holder.
3 Press one of the coffee
keys and halt it after 10
seconds.
4 Repeat the procedure
several times.
5 Remove the filter-holder
and carry our a few de-
liveries.
9.4
CLEANING FILTERS
AND FILTER-
HOLDERS
• Place two spoonfuls of
special cleanser in half a
litre of hot water.
• Immerse filter and filter-
holder (without its handle)
in it leaving them to soak
for at least half an hour.
• Rinse abundantly with
running water.
To Next Page
Loading...
Need help?
General
