57
EN
32
As regards to “Single coee”, “Double
coee” and “Continuous”, the variables
that can be set are:
ȗ CAPACITY ml: it sets the water amount
to be dispensed in ml;
ȗ PRE-BREWING: it sets the pre-brewing
time in seconds. When 0 is set, the
function is disabled.
By means of the CURSOR
keys, it
is possible to set the required values.
33
Press the ENTER
key to confirm.
NOTE
The amount set in ml is indicative of water
inserted in the machine hydraulic circuit
and it doesn’t refer to product quantity in
the cup, which is a variable depending on
the kind of coee and grinding.
HOT WATER
Through the Hot water
key, it is pos-
sible to set the dispensing duration ex-
pressed in seconds.
Increase or reduce the time through the
CURSOR
keys.
34
Press the ENTER
key to confirm.
STEAM
Through the Steam
key, it is possible
to set the dispensing duration expressed
in seconds.
Increase or reduce the time through the
CURSOR
keys.
35
Press the ENTER
key to confirm.
To Next Page
Loading...
Need help?
General
