Victory High-Ball - Fuel Specifications; Engine Oil Specifications; Identification Numbers

88
Specifications
Fuel Specifications
For best performance, use only unleaded gasoline with a 91 pump octane minimum (R+M/2
Method).
DO NOT USE E85 GASOLINE OR GASOLINE CONTAINING METHANOL. Using E85
gasoline or gasoline/methanol blends can result in poor starting and driveability, and may
damage critical fuel system components.
Gasoline containing up to 15% Methyl Tertiary Butyl Ether (MTBE) can be used.
Gasoline containing up to 10% Ethanol can be used.
Gasoline that has been reformulated or oxygenated can be used.
Engine Oil Specifications
Polaris recommends the use of VICTORY Brand Synthetic Blend 20W-40 Motor Oil or an
equivalent oil designed for use with wet clutches (such as those with a JASO MA rating).
Service Manual Availability
See your dealer to purchase a VICTORY Service Manual for your motorcycle.
Identification Numbers
Record important identification numbers below.
Vehicle Identification Number: _______________________________________
(Located on right side of steering head)
Engine Identification Number: _______________________________________
(Located on crankcase behind rear cylinder)
Ignition Key Number: _______________________________________________
(Stamped on shaft of key)
Model Number: ____________________________________________________
(Located on left side of steering head)