REMOTE CONTROL
1. ON / Standby: Push to turn the unit on or off.
2. MODE: Press to select between the different
functions such as the FM Tuner, AUX, Bluetooth, and
Phonograph.
3. SCAN: Press to automatically search and save radio
stations.
4. VOL-: Reduce Volume, press the button repeatedly
or press once and hold down until you reach the desired
volume level.
5. MEM: Press to use the Memory Function while using
the Radio.
6. PREVIOUS TRACK: In Bluetooth mode, press to
skip to the previous track. / In Radio mode, press to
manually tune to a desired station or press and hold this button to auto search a station.
7. BASS -: Press to reduce the bass
8. Treble -: Press to reduce the treble
9. PLAY/PAUSE: In Bluetooth mode, press to play or pause playback
10. VOL-: Increase Volume, press the button repeatedly or press once and hold down
until you reach the desired volume level.
11. NEXT TRACK: In Bluetooth mode, press to skip to the next track. / In Radio
mode, press to manually tune to a desired station or press and hold this button to auto
search a station.
12. BASS +: Press to increase the bass
13. Treble +: Press to increase the treble
• Even if the remote control unit is operated within the effective range, remote control
operation may be impossible if there are any obstacles between the unit and the
remote control.
• If the remote control unit is operated near other appliances which generate infrared
rays, or if other remote control devices using infrared rays are used near the unit, it
may operate incorrectly. Conversely, the other appliances may operate incorrectly.
TO ACTIVATE THE REMOTE CONTROL:
The remote control is built with cell battery before
shipment. To activate the battery, remove the transparent
tab at the bottom of the remote control.
Now the remote control is ready to use.
BATTERY REPLACEMENT: If the distance required between the remote control unit and
main unit decreases, the battery is exhausted. In this case, please replace the battery with
new one.
To Next Page
Loading...