Victrola Stream - Setup Your Turntable; Install Platter and Slipmat; Install Drive Belt; Attach Headshell

PLACE THE PLATTER ONTO
THE TURNTABLE.
SETUP YOUR TURNTABLE
CAREFULLY REMOVE THE
TAPED GUIDE STRING AND
PULL THE BELT OVER THE
MOTOR PIN. DISCARD
THE GUIDE STRING.
PLACE THE SLIPMAT ON
THE PLATTER.
INSERT THE HEADSHELL
INTO THE TONEARM
AND TIGHTEN THE
TONEARM COLLAR
COUNTER-CLOCKWISE
UNTIL HEADSHELL IS
SECURE.
ORTOFON 2M SERIES:
PUSH THE STYLUS COVER
TAB DOWN / FORWARD AND
GENTLY SLIDE THE
COVER OFF.
AUDIO TECHNICA VM95:
GENTLY SLIDE THE COVER
OFF OF THE CARTRIDGE.