Need help?Do you have a question about the Victron energy Cerbo GX and is the answer not in the manual?
General| Power Supply | 8 - 70 VDC |
|---|---|
| Storage Temperature | -40 to +70 °C |
| VE.Direct ports | 2 |
| VE.Can ports | 1 |
| WiFi | Yes |
| Bluetooth | Yes |
| USB ports | 1 |
| SD card slot | Yes |
| Display connection | Yes |
| Digital inputs | 2 |
| Protection category | IP21 |
| Maximum Current Consumption | 0.3 A |
| Humidity | 95%, non-condensing |
| Communication Ports | Ethernet, USB |
| Display | No |
Provides an overview of all connection types for the Cerbo GX.
Explains how to power the Cerbo GX using the Power in V+ connector.
Explains how to connect VE.Bus products like Multis and Quattros.
How to connect PV Inverters, including direct and meter connections.
How to connect the Cerbo GX to the internet via Ethernet.
Guide to connecting using the VictronConnect app via Bluetooth.
How to access the device via its built-in WiFi access point.
How to access Remote Console via a local network.
How to access the device remotely through the VRM portal.
Options for controlling Remote Console access via LAN/WiFi and VRM.
Overview of the menu structure and configurable parameters.
Two methods for updating firmware: internet or storage media.
Steps for directly downloading firmware updates from the internet.
How to update firmware using a microSD-card or USB-stick.
How to set and manage the input current limiter.
Introduces DVCC and its features based on battery types.
Lists battery compatibility and firmware version requirements for DVCC.
Explains how DVCC affects inverter/charger and solar charger algorithms.
General DVCC features applicable to all system types.
User-configurable system-wide maximum charge current setting.
To Next Page