Victron energy BlueSolar PWM-Pro SCC010030010 User Manual

63 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

Manual

EN

Handleiding

NL

Manuel

FR

Anleitung

DE

Manual

ES

Manual

SE

BlueSolar PWM-Pro Charge Controller

12V | 24V - 5A SCC010005010

12V | 24V - 10A SCC010010010

12V | 24V - 20A SCC010020110

12V | 24V - 30A SCC010030010

IMPORTANT

• Always connect the battery first, in order to

allow the Controller to recognize system voltage

• Use a 12V (36 cells) solar array for a 12V system.

• Use a 24V (72 cells) solar array for a 24V system.

Questions and Answers:

J
Jermaine WoodAug 13, 2025
What to do if Victron energy BlueSolar PWM-Pro SCC010030010 Controller charging, load and battery indicator (red) flashing simultaneously?
- A
  Ashley CochranAug 13, 2025
  If the charging, load, and battery indicators (red) are flashing simultaneously on your Victron energy Controller, it indicates a system voltage error. Verify that the battery voltage matches the controller's working voltage. You may need to change to a suitable battery or reset the working voltage. Press the load button to clear the malfunction.
J
James DeanAug 17, 2025
What to do if Victron energy BlueSolar PWM-Pro SCC010030010 Controller load status indicator red and fast flashing?
- R
  Richard MurrayAug 17, 2025
  If the load status indicator is red and fast flashing on your Victron energy Controller, it means there is a short circuit. Clear the short circuit and press the button; the controller will resume working after 3 seconds.
R
Randall GarciaAug 21, 2025
What to do if Victron energy Controller charging, load and battery indicator (orange) flashing simultaneously?
- T
  Tiffany KramerAug 21, 2025
  If the charging, load, and battery indicators (orange) are flashing simultaneously on your Victron energy Controller, it means the controller is experiencing over temperature. When the heat sink of the controller exceeds 85°C, the controller will automatically shut down. Once the temperature decreases to less than 75°C, the controller will restart.
S
shellygarrettAug 25, 2025
How to fix the charging LED indicator off during daytime when sunshine falls on PV modules of Victron energy BlueSolar PWM-Pro SCC010030010 Controller?
- L
  Lisa GreenAug 25, 2025
  If the charging LED indicator is off during the daytime when sunshine falls on PV modules of your Victron energy Controller, the PV array might be disconnected. Check that PV and battery wire connections are correct and tight.
M
Mrs. Kimberly JordanAug 29, 2025
What to do if Victron energy BlueSolar PWM-Pro SCC010030010 load status indicator red and slow flashing?
- R
  Ryan BowersAug 29, 2025
  If the load status indicator is red and slowly flashing on your Victron energy Controller, it indicates an overload. Remove or cut out the additional load and press the button. The controller will restart after 3 seconds.
J
Jillian HughesSep 1, 2025
Why is the green battery LED indicator fast flashing on my Victron energy Controller?
- C
  Christopher GonzalezSep 1, 2025
  The green battery LED indicator flashes rapidly on your Victron energy Controller because the battery voltage is higher than the over voltage disconnect voltage. Check the battery voltage. If it's too high, disconnect the solar module immediately and replace the controller.
A
Autumn ChristianSep 5, 2025
What to do if Victron energy BlueSolar PWM-Pro SCC010030010 Controller Battery LED indicator RED and loads not working?
- L
  lcoxSep 5, 2025
  If the Battery LED indicator is RED and loads are not working on your Victron energy Controller, it means the battery is over discharged. The controller automatically cut off the output. The LED indicator will return to green when the battery is fully charged.
F
frederickyoungSep 8, 2025
Why is the Battery LED indicator orange on my Victron energy Controller?
- Z
  zdavisSep 9, 2025
  The Battery LED indicator is orange on your Victron energy Controller because the battery is under voltage. The load output is normal. The Charging LED indicator will return to green automatically when fully charged.

Victron energy BlueSolar PWM-Pro SCC010030010 Specifications

General

Brand	Victron energy
Model	BlueSolar PWM-Pro SCC010030010
Category	Controller
Language	English

Summary

Important Initial Setup & Safety Notes

General Safety Information

Environmental and Handling Precautions

Controller Programming Options

Programming Methods and Connections

Load Program Configurations

Battery Type Selection

Comprehensive Protection Features

Load Protection

Protects against overload and short circuits on the load output.

PV and Battery Polarity Protection

Full protection against reverse polarity for PV input and battery connection.

Temperature and Voltage Protection

Includes overheating protection and handling for damaged temperature sensors.

Transient Voltage Protection

Troubleshooting Common Issues

LED Indicator Fault Diagnosis

Guide to interpreting LED indicators for diagnosing faults like PV disconnect or low voltage.

System Voltage Error Resolution

Steps to resolve system voltage errors and ensure correct operation.

Technical Specifications Overview

Electrical and Environmental Specs

Details on voltage, current, self-consumption, operating temperature, and humidity.

Physical Dimensions and Mounting

Standards Compliance

Advanced Battery Settings

Capacity and Voltage Configuration

Charging Stage Parameters

Related product manuals

Preview: BlueSolar PWM Series

BlueSolar PWM Series

Preview: Victron energy BlueSolar

Victron energy BlueSolar

Preview: BlueSolar MPPT 75/10

BlueSolar MPPT 75/10

Preview: BlueSolar MPPT 75/15

BlueSolar MPPT 75/15

Preview: BlueSolar MPPT 100/30

BlueSolar MPPT 100/30

Preview: BlueSolar MPPT 100/15

BlueSolar MPPT 100/15

Preview: BlueSolar MPPT 150/70

BlueSolar MPPT 150/70

Preview: BlueSolar MPPT 150/35

BlueSolar MPPT 150/35

Preview: Victron energy Lynx Smart BMS

Victron energy Lynx Smart BMS

Preview: Victron energy CCGX

Victron energy CCGX

Preview: Victron energy Cerbo GX

Victron energy Cerbo GX

SmartSolar MPPT RS 450/200