Victron energy BlueSolar User Manual

Manual
EN
Handleiding
NL
Manuel
FR
Anleitung
DE
Manual
ES
Manual
SE
IT
Appendix
BlueSolar PWM Charge Controller – LCD - USB
12V | 24V | 30A
48V | 10A
48V | 20A
48V | 30A
IMPORTANT
Always connect the batteries first.
Use for 12V battery system only 12V
(36 cells) solar panel array.
Use for 24V battery system only 24V
(72 cells) solar panel array.
Use for 48V battery system only 2x24V
(72 cells) solar panel array in series.

Victron energy BlueSolar Specifications

General

Maximum Efficiency	98%
Max. PV Open Circuit Voltage	150V
Model	BlueSolar
Nominal Battery Voltage	12V, 24V, 48V
PV Voltage	150V
Protection	Over-temperature, short-circuit, reverse polarity, over-voltage
Battery Voltage	12V, 24V, 48V
Absorption Voltage	14.4V (12V), 28.8V (24V), 57.6V (48V)
Float Voltage	13.8V (12V), 27.6V (24V), 55.2V (48V)
Temperature Compensation Value	-16mV/°C (12V), -32mV/°C (24V), -64mV/°C (48V)
Operating Temperature Range	-30 to +60°C

Summary

General Information

Features

Installation

LCD DISPLAY and SETTINGS

Monitoring & Settings

Explains how to monitor battery voltage, charge status, and adjust settings.

Alarms

High temperature

Details the controller's response to high temperatures and protective measures.

Low voltage.

Explains the alarm when battery voltage is discharged too low.

Short-circuit protection.

Describes the controller's reaction to a short-circuit event.

Over-current protection.

Details the controller's response to excessive output current.

Specifications