Victron energy Skylla-i 24/80 (1+1) User Manual (English)

Questions and Answers:

A
Austin RuizAug 4, 2025
Why is my Victron energy Skylla-i 24/80 (1+1) Battery Charger not fully charging the battery?
- M
  Matthew PinedaAug 4, 2025
  If your Victron Energy Battery Charger isn't fully charging the battery, there are a few potential causes. First, there might be a bad battery connection, so check the connection. Second, the battery select switch could be in the wrong position; if this is the case, select the correct battery type using the rotary switch. Finally, cable losses might be too high; use cables with a larger cross-section or consider using external voltage sensing.
A
Adam HoodAug 12, 2025
What to do if the Failure LED is on for Victron Energy Battery Charger?
- C
  christophermurphyAug 12, 2025
  If the Failure LED is on for your Victron Energy Battery Charger, it could be due to several reasons. The battery voltage might be too high (over 36V), so check all charging equipment, cables, and connections. Alternatively, the bulk time might be too long (over 10 hours), indicating a possible cell failure or the need for a higher charge current. Also, high temperature in the cabinet might be the reason, so inspect the cabinet's air vents and improve the cooling of the environment.
C
Christina HarrisAug 19, 2025
What to do if Victron energy Skylla-i 24/80 (1+1) Battery Charger is overcharging the battery?
- M
  Michael McneilAug 19, 2025
  If your Victron Energy Battery Charger is overcharging the battery, the battery select switch might be set incorrectly; in this case, select the correct battery type with the rotary switch. Another possibility is that a battery cell is defective, requiring you to replace the battery.
C
Christine LindseyAug 26, 2025
How to troubleshoot a Victron Energy Battery Charger that does not function?
- C
  Christina FloresAug 27, 2025
  If your Victron Energy Battery Charger isn't functioning, it could be due to issues with the mains supply. Measure the mains voltage to ensure it's within the range of 180-265 VAC. Alternatively, the input or output fuses might be defective, requiring you to return the product to your dealer.

Victron energy Skylla-i 24/80 (1+1) Specifications

General

Input Voltage	230 VAC
Input Voltage Range	180-265 VAC
Output Voltage	24 VDC
Output Current	80 A
Number of Outputs	2
Number of Battery Banks	2
Second Output Current	80 A
Protection Category	IP22
Input Frequency	45-65Hz
Operating Temperature	-20°C to +60°C