EasyManua.ls Logo

VIDEOMAN VS-902 - Maintenance, Safety, and Specifications; Product Maintenance and Care; Technical Specifications Overview

Default Icon
12 pages
Print Icon
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MAINTENANCE
1. All components should be protected from violence vibration, impacting, knocking and dropping.
2. If necessary, clean the lens and screen with dampen soft cotton cloth do not use chemical clean agent.
3. Image distortion may occur if the monitor is installed near microwave ovens, TVs, computers, DC/AC adaptors or any other electro
magnetic field generating appliances.
4. Keep away all monitors and cameras from high temperature, dust, caustic and oxidation gas.
5. Use only the power supply which is supplied by the manufacture.
6. Pay attention to the high voltage inside the products. Please ensure this unit is only serviced by qualified professionals.
TECHNICAL SPECIFICATIONS
1. Talk auto-off time: 90 seconds
2. Power supply for indoor monitor
16V DC : Ref.VS-902M, VS-952M
240 AC : Ref.VS-902PM, VS-952PM
3. Power for outdoor station: 12V DC (Supplied by indoor monitor)
4. Power for video phone (Ref.VS-902H): 12V DC (Supplied by monitor)
5. Power consumption: Standby 0.5W, Max. 15W
6. Indoor monitor screen: 4“ B/W CRT (Ref.VS-902, VS-902PM) or 4” colour TFT LCD (Ref.VS-952M, VS952PM)
7. Camera Lens: 3.6mm, 72 degree horizontal visual angle
8. Image sensor : 1/3” CCD
9. Resolution: >300 TV lines
10. Video signal: 1Vp-p, 75, CCIR standard
11. Connection mode: 4 wire, polarity conscious
12. Surveillance auto-off time: 30 seconds
13. Door latch operation time : 3econds by single click or “press & hold” for longer time
WARRANTY STATEMENT
This equipment is warranted to be free from defects in material and workmanship for a period of twelve months from the date of purchase as indicated on
the proof of purchase and/or by serial number on the product.
Defective units returned by the purchaser at his own expense during this period will be required (or replaced at the option of the distributor) with an
equivalent piece of refurbished and tested equipment. The repaired or replaced equipment is then warranted for the balance of the initial warranty period
or for thirty (30) days, whichever is longer.
The repair or replacement will be without charge provided that the equipment has not been subjected to electrical of physical misuse or to unauthorised
repair or modification.
The foregoing warranty is in lieu of all other warranties, express or implied, including, but not limited to, merchantability or fitness for a particular purpose.
The purchaser's exclusive remedy with respect to any and all losses or damages resulting from any cause whatsoever, shall be repair or replacement as
specified above.
Distributor shall in no event be liable for any consequential or incidental damages, however occasioned, whether by negligence or otherwise. No suit or
action shall be brought against manufacturer more than one year after the accrual of the cause of action therefore. No agent, employee or representative
of the distributor nor any other person is authorised to modify this warranty in any respect. This warranty gives you specific legal rights and you may also
have other rights which vary from state to state.
www.videoman.com.au

Related product manuals