VIDEOMAN VS-902 User Manual

VIDEMAN is a registered trade mark of EOS Australia Pty Ltd
Designed, imported and distributed by Videoman Systems Co.
VS-902
B&W 16VDC VS-952 Colour 16VDC
( VS-902M + VS-902C + VS-902PSU ) ( VS-952M + VS-952C + VS-902PSU )
VS-902P
B&W 240VAC VS-952P Colour 24VAC
( VS-902PM + VS-902C ) ( VS-952PM + VS-952C )
060911.67 www.videoman.com.au

VIDEOMAN VS-902 Specifications

General

Model	VS-902
Display	7-inch TFT LCD
Resolution	800 x 480 pixels
Operating Voltage	DC 12V
Operating Temperature	-10°C to +50°C
Operating Humidity	10% to 90% RH

Summary

Security Video Intercom Installation Guide

System Wiring Diagrams - Single Camera

Dry Contact Mode Wiring

Diagram for connecting the system using dry contact mode.

DC Output Mode Wiring

Diagram for connecting the system using DC output mode.

System Wiring Diagrams - Multiple Units

Two Cameras and Multiple Monitors Setup

Wiring guide for systems with multiple cameras and monitors.

System Operation and User Controls

Monitor Functions and Adjustments

Using the monitor for viewing, adjusting settings, and operating door latch.

Intercom, Ring Tone, and Camera Selection

Cable Requirements - STAR Wiring Method

CAT5 Cable Configuration by Distance

Specifies CAT5 cable requirements based on system distance.

Cable Requirements - Daisy Chain Wiring Method

Daisy Chain Wiring Diagrams

Illustrations of daisy chain wiring configurations for system connection.

Maintenance, Safety, and Specifications

Product Maintenance and Care

Technical Specifications Overview