appear instead of the semi-colon in the L.C.
display clock.
Note: When both alarm clock and self power on are active, “d” and “e” will
flash alternatively.
In 24H mode, self power on is cancelled by
entering zero values for hours and minutes.
In 12H mode, self power on is cancelled by
entering “a12:00”.
Note: Self power can be programmed even with the system turned off.
Self Power Off
This function allows turning the system off automatically at a
predetermined time. The following explanation is for 24H mode.
Select this function with the menu key and wait for 3 seconds.
The hour flashes, press the
keys
to set the hour.
Wait for 3 seconds or press the menu key
to
move to minutes.
Press the
keys to set the
minutes and wait 3 seconds or press the menu
key to finish.
Note: To fast scroll press and hold the up or down key.
If self power on is active, a flashing “e” will
To Next Page
Loading...
