Viessmann EVO-COOL Series User Manual

Ensure compliance with the following instructions prior to beginning work on the Refrigeration unit:
Refrigeration units EVO-COOL®
Installation and
operating Instructions
6008309-01 GB
General notice (liability): the details of this technical documents serve for description. Consents regarding the availability of certain features or
regarding a certain purpose always require a special written agreement.
GB
We reserve the right to make technical changes! Status as of 02.15Page 1
Installation, cleaning maintenance and repair work must be
performed only by a refrigeration specialist company.
Technical modi cations and manipulation are prohibited.
Non-compliance will result in forfeiture of all warranty claims.
Work on the Refrigeration unit is authorised only when the mains
plug has been removed. The Refrigeration unit must be protec-
ted against unauthorized activation by appropriate means
(e.s. warning sign). The directives, VDE 0105 Part 1, for working
on electrical equipment must be complied with.

Viessmann EVO-COOL Series Specifications

General

Brand	Viessmann
Model	EVO-COOL Series
Category	Boiler
Language	English

Summary

Description

Refrigeration Unit Types

Details of CS series units for room cooling.

Deep-Freeze Unit Types

Details of FS series units for deep-freezing.

General Information

Warranty Conditions, Standards, and Installation Area

Warranty terms, regulatory compliance, and room setup requirements.

Handling, Delivery, Decommissioning, and Energy Conservation

Procedures for transport, unpacking, shutdown, and energy saving tips.

Cleaning and Maintenance of the Refrigeration unit

Disposal of Cooling Agent

Procedures for safe disposal of refrigerant.

Installation in a Viessmann Coldroom

Electrical Power Supply Cold Room

Door Contact Switch Connection

Wiring the door switch for system control.

Fault Indicator Contact

Connecting external fault reporting.

Power Supply and Commissioning

Connecting power and initial startup procedures.

Defrosting

Defrosting Process and Components

Explanation of defrost cycle and sensor placement.

Defrosting Options and Water Management

Cycle, plan, manual defrost, and water drain.

Cooling Mode

Cooling Mode Operation

Explanation of the cooling process.

Cooling Mode Types

Normal, schedule, and emergency modes.

First Steps EVO-COOL®

Initial Unit Check and Setup

Unit inspection, connection, and control panel overview.

Startup and Menu Navigation

Display sequences, knob functions, and login.

Temperature and Standby Settings

Adjusting target temperature and checking standby status.

Operation of the Regulation

Menu Enabling and Display

User login, access control, and display overview.

Menu Settings

Configuration options for language, units, etc.

Information and LogBook

Displaying statuses and viewing logged faults.

Program, Change Board, Data Exchange

Setting schedules, bus mode access, and USB data transfer.

Menu Warnings

Displaying current warnings.

Bus Mode

Unit Connection and Operation Modes

Wiring, addressing, and operation modes for bus systems.

Bus Operation Faults and Mains Connection

Handling outages and control unit mains connection.

Fault Rectification

Refrigeration Circulation Schematic

Electrical Circuit Diagram (230V)

Electrical Circuit Diagram (400V)

Technical Data

CE Conformance Explanation