How to troubleshoot communication fault with variable speed circulation pump on Viessmann Vitodens 200-W WB2B?
If your Viessmann Boiler displays error 'C5', indicating a communication fault with the variable speed circulation pump of the heating circuit connection set, check the setting of coding address ”30” and set it to “0” (30:”0”).
What to do if the fixed high limit switch is open on a Viessmann Boiler?
If your Viessmann Boiler shows the error 'F2', which means the fixed high limit switch is open (activated), you should check the heating system fill level and the circulation pump. Bleed air from the system and inspect the fixed high limit switch and connecting cables. Finally, press the 'RESET' button.
What to do if the flame signal is missing on Viessmann Boiler at burner start?
If the Viessmann Boiler displays error 'EE', indicating a missing or weak flame signal at burner start, you should check the ionization electrode and cable. Also, check the gas supply, condensate drain, ignition, and ignition module. Then, press the 'RESET' button.
What does error F0 mean on Viessmann Vitodens 200-W WB2B?
If your Viessmann Boiler displays error 'F0', indicating an internal fault, replace the control unit.
How do I fix a communication fault with the variable speed circulation pump in my Viessmann Vitodens 200-W WB2B?
If your Viessmann Boiler displays error 'C7', indicating a communication fault with the variable speed circulation pump of the heating circuit without a mixing valve, check the setting of coding address ”E5”.
What does error 9F mean on Viessmann Boiler?
If your Viessmann Boiler displays error '9F', indicating a solar control unit fault, check the solar control unit.
Why does the gas valve close too late on my Viessmann Boiler?
If the Viessmann Boiler displays error 'F8', indicating the gas valve closes too late, check the gas valve and both control wiring/connections. Press RESET.
How to fix communication fault with the accessory kit on Viessmann Boiler?
If your Viessmann Boiler displays error 'bA', indicating a communication fault with the accessory kit for the heating circuit with mixing valve, check the accessory kit connections and coding. Turn on the accessory kit.
What to do if the programming unit is faulty on Viessmann Boiler?
If your Viessmann Boiler displays error 'A7', indicating a faulty programming unit, replace the programming unit.
What does error code Eb mean on a Viessmann Vitodens 200-W WB2B?
If your Viessmann Boiler displays error 'Eb', and the boiler control initiated a combustion calibration but could not complete the process, ensure the heat generated by the boiler is being removed. Check the connecting cable and the ionization electrode, and inspect the flue gas system for flue gas recirculation. Verify pump operation and check the switching points of the flow switch. Check the coding card, gas valve, and coding address 82. Also see address 12. Press ” RESET”.
Essential safety, installation, and warranty guidelines for the boiler.
Risks and prevention measures for carbon monoxide exposure.
Measures to prevent and respond to fire hazards associated with the boiler.
Initial steps, boiler model details, and factory presets for operation.
Explanation of the control unit, buttons, displays, symbols, and heating circuits.
Instructions for starting, stopping, and standby operation of the heating system.
Setting permanent, reduced, temporary, and holiday room temperatures.
Configuring domestic hot water heating settings and schedules.
Customizing time, date, language, and display contrast settings.
Viewing temperatures, operating status, time programs, and fault codes.
Addressing heating issues and adjusting boiler behavior based on symptoms.
Annual inspection and maintenance by qualified contractors for optimal performance.
Advice for efficient heating, water usage, and improving insulation.
Procedures for safe appliance lighting and general operating guidelines.
General| Type | Condensing Boiler |
|---|---|
| Fuel Type | Natural Gas/LPG |
| Heat Exchanger | Stainless Steel Inox-Radial |
| Installation | Wall-mounted |
| Max. Working Pressure | 3 bar |
| Efficiency | Up to 98% |
| Modulation Ratio | Up to 1:6 |
| Control | Vitotronic control system |
To Next Page
