Ready for operation
11
Activating the energy saving mode Vitotronic 300-K, MW1S
The energy saving mode is only possible in the ”rw“ heating program. Switch
on the energy saving mode when you require particularly economic central
heating for a short time. In the energy saving mode the preset room temperature
is automatically lowered.
Energy saving mode
To activate the energy saving mode
1. Press the heating circuit selector
button; the button is illuminated.
2.
Press ; the button is
illuminated, the energy saving
mode display appears in the
display window for a short
time.
To cancel the energy saving mode
The energy saving mode is cancelled
automatically the next time the
preset heating program switches to
central heating with the ”reduced
room temperature”.
If you want to cancel the energy
saving mode immediately, press the
heating circuit selector button and
the
button again; the button is
no longer illuminated.
The light on the button turns off
after approx. 1 minute. The
energy saving mode is still active.
5581 751 v1.1
To Next Page
Loading...
