Viessmann GC1 - Page 24

Settings
24
Changing the heating pattern Vitotronic 300-K, MW1S
V
i
t
o
t
r
o
n
i
c
,
M
W
1
S
Changing the heating pattern
Slope
Shift
1. Open the hinged cover on the
programming unit.
2. Press the heating circuit selector
button; the button is illuminated.
3.
Press for ”Slope”
or
Press for ”Shift”.
4. / Press / until the
required value is displayed.
5. Press to confirm;
the display changes and
shows the boiler
temperature.
6. Close the hinged cover on the
programming unit.
As a guide, please refer to the
table headed ”Change heating
pattern if...” on page 23.
5581 751 v1.1