Ready for operation
7
Your heating system is preset ...
The control units are preset in the factory to a standard operating mode.
The heating system, is therefore ready for operation.
You can change the factory settings to suit your individual preferences.
Vitotronic 100, GC1
Heating Program
The heating program is set for
“Central heating and domestic hot
water”, i.e. heating takes place,
controlled via the Vitotronic 300-K, MW1S.
Vitotronic 300-K, MW1S
Date and time (CET)
The date and time are preset in the
factory. Resetting for winter/summer
time takes place automatically.
Heating program
The heating program is set for
“Central heating and domestic hot
water”, i.e. central heating and
domestic hot water heating
(if a DHW tank is installed)
take place, in accordance with
the time programs.
Time program
Between 6.00 and 22.00 hrs, central
heating takes place with the normal
room temperature and, between 5:30
and 22.00 hrs, domestic hot water
heating (if a DHW tank is installed).
5581 751 v1.1
To Next Page
Loading...
