Installation and
service instructions
Solar−Divicon,
part no.7188391 and 7188392,
Solar circuit pump line, part no.7188393 and 7188394
Safety instructions
¨
Please observe these safety instructions.
Installation, initial start−up, inspection,
maintenance and repairs must be
carried out by a competent person
(heating engineer/installation
contractor).
Before working on the equipment/
heating system, isolate the power
supply (e.g. by removing a separate
mains fuse or by means of a mains
isolator) and safeguard against
unauthorised reconnection.
When using gas as fuel, also close
the main shut−off valve and safeguard
against unauthorised reopening.
It is not permitted to carry out repairs
on parts that fulfil a safety function.
For replacements, use only original
spare parts from Viessmann or those
which are approved by Viessmann.
Dimensions
A SolarDivicon
B Safety assembly
C Solar circuit pump line
5862810GB5/2005
Please keep safe
380
240
0
20
40
60
80
100
120 0
20
40
60
80
100
120
380
210
0
20
40
60
80
100
120
A
B
C
To Next Page
Need help?
General