19
5608 488 v1.2
Vitocell 100-B Installation Instructions
Inspection Opening and Front Cover
1. Install front insulation blanket.
2. Install inspection cover and front cover.
3. Tighten screws.
Additional Information
Post Installation
Start-up information
DHW Tank Start-up/Service Instructions
Service binder
1. File all Parts Lists, Operating and Service Instructions
in the Service Binder.
2. Install a protective hanging case near the boiler and
store the Service Binder in this location.
For a listing of applicable Viessmann literature, please
see Important Regulatory and Installation Requirements
on page 4.
1. Install front insulation blanket.
2. Install inspection cover.
Inspection opening and front covers for 79 USG (300 L) tank Inspection opening and front cover for 120 USG (450 L) tank