To Next PageTo Next Page
Need help?Do you have a question about the Viessmann Vitodens 200-W B2HA series and is the answer not in the manual?
General| Heat Exchanger Material | Stainless steel |
|---|---|
| Type | Wall-mounted condensing boiler |
| Modulation Ratio | 1:17 |
| Efficiency | Up to 98% |
| Control | Vitotronic 200 |
| Fuel Type | Natural gas or propane |
| Water pressure | Up to 3 bar |
| Temperature range | Up to 85 °C |
| NOx emissions | Low NOx emissions |
| Weight | Varies by model |
| Dimensions (HxWxD) | Varies by model |
Overview of safety, installation, and warranty guidelines for the product.
Requirement for qualified professionals for installation, adjustment, and service.
Risks associated with carbon monoxide from improper operation.
Requirement for adequate fresh air for safe operation and combustion.
Importance of a proper venting system to prevent CO poisoning.
General safety precautions for operation and maintenance.
Importance of understanding operation and ensuring proper start-up.
Requirements for personnel working on the heating system.
Recommendations for regular inspection and cleaning.
Recommendations for safe operation and regular checks.
Precautions and actions to prevent frozen water pipes.
Requirements for the installation area to ensure safe operation.
Description of the control unit and its components.
Checking for service requirements and messages.
Identifying and acknowledging system faults.
Troubleshooting steps for no hot water supply.
Troubleshooting steps when "A" and "Fault" are displayed.
Actions to take when service is due and indicated.
Procedures for inspecting, cleaning, and maintaining the system.
Key points to check for central heating setup.
Adjusting room temperature for standard and reduced heating modes.
Key points to check for domestic hot water (DHW) setup.
Steps for safely initiating the heating system operation.
Procedures for safely stopping heating and DHW functions.
