43
09. OK to confirm
Further information regarding the message is dis-
played.
10. Make a note of the fault number. For example:
F.160 "Communication error CAN bus".
This enables the contractor to be better prepared
and may save you unnecessary travelling costs.
11. to go back a step in the menu
12. for further messages
13. to go back a step in the menu
14. for "Contractor"
The contact details of your heating contractor are
displayed (if your contractor has entered them).
15. Please notify your heating contractor.
16. for approx. 3 s, to exit the menu.
Resetting the burner after a burner fault
If the burner is locked due to a fault, you can reset the
burner.
Reset via home screen:
Tap the following buttons:
1. for "Unlock"
2. OK to confirm
Reset via submenu:
Tap the following buttons:
01. OK to confirm
02. press and hold for approx. 3 s.
03. press and hold for approx. 3 s.
04. for "Active messages"
05. OK to confirm
06. for "Burner fault"
07. OK to confirm
08. for "Unlock"
09. OK to confirm
10. OK to acknowledge the information
11. for approx. 3 s, to exit the menu.
Danger
If faults are not rectified, they can have life
threatening consequences.
Do not reset the burner several times in quick
succession. Immediately notify your contractor if
a burner fault occurs. Your contractor will be
able to analyse the cause and rectify the fault.
Acknowledging messages
Tap the following buttons:
1. Call up the home screen.
2. press and hold for approx. 3 s.
3. for "Active messages"
4. OK to confirm
5. for "Acknowledge"
6. OK to confirm
7. OK to acknowledge the information
All pending messages are acknowledged.
Checking message lists
Tap the following buttons:
1. Call up the home screen.
2. press and hold for approx. 3 s.
3. for "Active messages"
Checks
Checking fault messages (cont.)
6172108
To Next Page
Loading...
Need help?
General
