Viessmann VITORONDENS 200-T - Checking the Active Charcoal Filter (if Installed); Checking the Connections on the Flue Gas Side for Tightness

14
Checking the active charcoal filter (if installed)
Observe the active charcoal filter manu-
facturer's instructions.
Checking the connections on the flue gas side for tightness
B
A
Note
Traces of condensate indicate a leak.
1.
Remove thermal insulation strip A
and pull thermal insulation mat
B
out a little.
2. Check the heat exchanger fixings for
firm seating.
3. Check the connector on the heat
exchanger for leaks.
Commissioning, inspection, maintenance
Further details regarding the individual steps
(cont.)
5600 259 UAE