20
The Vitotrol 300-E remote control enables you to
adjust the following settings from the living space:
■
Room temperatures
■
DHW heating:
–
DHW temperature
–
Once-only DHW heating
■
Operating programs:
–
Holiday program
–
Holiday at home
All settings are transmitted from the Vitotrol 300-E to
the control unit and vice-versa. It is always the most
recent settings that apply.
Fig. 8
A
Display
B
Illuminated ring ("light guide")
C
"Settings" menu operating button
D
Room temperature and humidity sensor
E
Proximity and brightness sensor
■
To scroll through the display.
■
To confirm your selection.
■
To terminate a setting adjustment in progress.
■
To adjust values.
■
To confirm your selection.
■
To terminate a setting adjustment in progress.
Note
■
Never seal off the opening for room temperature and
humidity sensor
D
.
■
If no settings are adjusted at the remote control for at
least 1 minute, the display backlighting switches off
(standby): See page 22.
Using the remote control
Using the remote control
5839615
Operation
To Next Page
Loading...
