24
The function "Holiday at home" has the following
effect:
■
The room temperature during the periods between
the set time phases is raised to the set value of the
first time phase of the day: From reduced room tem-
perature to standard room temperature or comfort
room temperature.
■
If no time phase is active before 0:00 h, your rooms
are heated to the reduced room temperature until the
next time phase becomes active.
■
DHW heating is active.
■
The "Holiday at home" function starts and ends
according to the set times for the start date and end
date.
Note
■
As long as the "Holiday at home" function is
switched on, the default display shows "Holiday at
home" and the set start date and end date.
■
If "Detached house" was selected by your contrac-
tor during commissioning, the function is adopted for
all heating circuits.
Example
For Monday and Tuesday, 2 time phases are set
respectively.
Mo
u
0 2 4 6 8 10 12 14 16 18 20 22 24
Di
2 4 6 8 10 12 14 16 18 20 22 24
Mo
0 2 4 6 8 10 12 14 16 18 20 22 24
Di
2 4 6 8 10 12 14 16 18 20 22 24
A B C C B
A B C
Fig. 9
Temperature levels in line with the set time pro-
gram
Temperature level if "Holiday at home" is active
A
Reduced room temperature
B
Standard room temperature
C
Comfort room temperature
Switching on "Holiday at home"
Press the following buttons:
1.
Operating button
C
: See Fig. 8, page 20.
2. to select "Holiday at home".
3. to select "SET".
4. Set the start date.
5. to confirm
6. Set the end date.
7. to confirm
Switching off "Holiday at home"
Press the following buttons:
1. If the standby screen is active, press any button.
Or
Approach the proximity sensor of the remote con-
trol.
2. to select "CANCEL".
Saving energy during long periods of absence
To save energy during long periods of absence, select
"Holiday program".
Central heating
Adjusting the room temperature for extended… (cont.)
5839615
Operation
To Next Page
Loading...
