VIETA VPC66BT - T-Menu; Answering;Rejecting an Incoming Call

10
OPERATION
seconds to let the unit reconnection automatically
or press and hold CON button (18) for several
seconds to reconnect. During reconnection, LCD
will show “CONN TRY” several times and then
show “CONN OK” if successfully connect.
T-MENU
When successful paired, shortly press T-MENU
button (6) on the front panel will enter the
telephone menu, keep pressing this button or
press
/ buttons (1) to change the items
in this menu. The items will be displayed in
the following sequence: PRE NUM /RECEIVED/
DIALED/ MISSED/ MANU ANS/TALK XX.
The details please see the following instruction.
¾ PRE NUM: Display the speed dial phone
number you have stored in the preset
memory. The system can store maximum 10
numbers.
Note: Every system reset operation by
pressing reset button (25), the setup of PRE
NUM will be cleared.
1) Store speed dial numbers
a. Press T-MENU button and select PRE
NUM item.
b. Use the volume knob (26) to scan which
memory available store.
c. If any memory is available for input, the
phone item is empty, and you can see
the Memory No. (”0”~”9”) will appear
on LCD.
d. Press SEL/MENU button (26) to enter
the input interface. You can see “DIAL
-->” on the LCD.
e. Use 0~9, *, #, to input the desired
telephone number.
Note: When you input a wrong
number, shortly press CLR button
(24) will clear it. Press and hold CLR
button (24) will clear all the numbers.
f. When you finish input, press
SEL/MENU button (26) to store the
number into the preset memory. LCD
will show “SAVE OK”.
2) Make a speed dial call
Press
button (4), then press and hold
the preset buttons (M0~M9) to call the
phone number stored in the memory. And
the number you stored in it will be displayed
on LCD.
3) Preview the speed list
Press T-MENU button (6) to select PRE
NUM menu. If you want to call any number
in dial list, use the volume knob (26) to
select the speed dial number, and shortly
press
button (4) to confirm the dialing.
4) Edit the speed dial list
Select the number you want to edit from
the speed dial list, then shortly press
SEL/MENU button (26) to enter the edit
interface.
¾ RECEIVED: Display the last call you have
received.
You can use the volume knob (26) to scan
the last received numbers. And you can
shortly press
button (4) to confirm the
dialing.
¾ DIALED: Display the last 10 dialed number.
You can use the volume knob (26) to scan
the numbers. And you can shortly press
button (4) to confirm the dialing.
¾ MISSED: Display the call you have missed.
You can use the volume knob (26) to scan
the numbers. And you can shortly press
button (4) to confirm the dialing.
¾ MANU ANS/AUTO ANS
In this mode, press the volume knob (26) to
select MANU ANS (manual answer) or
AUTO ANS (auto answer).
In AUTO ANS mode, when a call coming.
The unit will answer the call automatically.
In MANU ANS mode, when a call coming.
You can press
button (4) to answer the
call, or press
button (24) to reject the
incoming call.
¾ TALK VOLUME: Display the current talk
volume level, you can use the volume knob
(26) to adjust the talk volume level in a
certain range.
ANSWERING/REJECTING AN INCOMING
CALL
Please refer to the MANU ANS/AUTO ANS
paragraph in T-MENU section.
MAKING AN OUTGOING CALL
1) Making an outgoing call from PRE NUM,
RECEIVED, DIALED, MISSED, please refer to
the T-MENU section.