11
OPERATION
2) Making an outgoing call by inputting the phone
number manually.
Press
button (4) on the front panel. Use
0~9, *, # buttons to enter the phone number
you want to dial. Then press button (4)
again will call the number.
Note: if you input the wrong number, shortly
press CLR button (24) will clear it. Press and
hold CLR button (24) will clear all number.
3) Marking last call number, press
button (4)
two times LCD will show “LAST NUM”, then
press
button again to call out the last call
number.
HOLDING A CALL
During the talking mode, pressing
button (4)
can interrupt the call temporally, then press
button (4) again to continue the call. This function
needs the mobile phone support.
TRANSFER THE CALL BETWEEN MOBILE
PHONE AND THE UNIT
During the talking mode, you can press and hold
T-MENU button (6) to transfer the phone call
between the mobile phone and the unit.
Note:
If you transfer the call to mobile phone, the mute
of the present mode will be released at the same
time.
BLUETOOTH AUDIO (A2DP FUNCITON)
The unit supports Bluetooth audio function. If
your mobile phone can play stereo audio, when
the paring is ok, you can select an audio file and
set to A2DP function on your mobile phone (It is
up to the mobile phone, the different mobile
phone has the different define.)
When in A2DP mode, only
/ buttons (1)
and PAU button are functional.
Use
/ buttons (1) on the front panel of
the unit to choose the previous/next track.
Press PAU to pause the play.
To Next Page
Loading...
