EasyManua.ls Logo

Viewpro Q30T - Page 10

Viewpro Q30T
14 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1 zoom tele
2 stop zoom
3 zoom wide
1 focus tele
2 stop focus
3 focus near
1
2
3
-8-
Position 1: Lowest speed for pitch and yaw.
Position 2: Middle speed for pitch and yaw.
Position 3: Highest speed for pitch and yaw. The speed is continuously quickly
from 1 to 3.
One click: Home position.
Two click: Look down.
Three click: Yaw not followed by frame.
Four click: Yaw followed by frame.
Five click: Restore the factory settings.
(Click = from 2 to 3 and back to 2 quickly)
ZOOM: Zoom the camera
Focus: Focus the camera
Mode: Change the speed / home position