ViewSonic IFP6550 Manual

2 pages

To Next Page

Maaz Q. Page 1 of 2 Date 9/28/17

ViewSonic Corporation Rev. 3

Update PS175 for IFPxx50

Symptoms: Image flicker

This SOP is to outline the firmware update procedure to improve communication with various

graphic chipsets that currently fall outside the displays tolerance range, such as the “Intel HD530”

Only applies to units PRIOR to the serial numbers listed below

IFP6550 – V25173800001

IFP7550 – UZW173600001

IFP8650 – UZU17390001

Required equipment:

 ViewSonic IFPxx50 series display

 VPC10-WP Slot in PC (installed)

 USB flash drive

 Upgrade file “upgrade_510” (provided by ViewSonic)

Instructions:

1. Format your USB flash drive into FAT32.

2. Place folder named “upgrade_510” onto root directory of the USB drive.

Insert the USB drive into the USB2.0 port

3. Press POWER button to turn display on

4. When LED indicator turns BLUE, press and hold POWER button to prompt firmware update.

FW upgrade process will last approximately 5 minutes. During the update, the PC will make a

beeping sound. Once update completes, the display will restart and launch into Android.

Update Verification:

The display will automatically restart and launch to Android with Upgrade factory menu. Exit out

of this menu.

**Any changes made in the factory menu can result in failure or malfunction of the

ViewSonic Display. ViewSonic will not warranty unauthorized changes made within the

factory menu**

Other manuals for ViewSonic IFP6550

General

Product color	Black
Product design	Digital signage flat panel
Placement supported	Indoor/outdoor
Panel mounting interface	400 x 600 mm
Panel life	- h
Pixel pitch	- mm
Response time	8 ms
Display diagonal	65 \
Touch technology	Multi-touch
Display brightness	350 cd/m²
Display technology	LED
Native aspect ratio	16:9
Contrast ratio (typical)	1200:1
Display number of colors	-
Internal memory	2 GB
Processor cores	4
Processor model	A53
Processor family	ARM Cortex
Processor frequency	1.2 GHz
Internal storage capacity	16 GB
Operating system installed	Android 5.1
USB version	2.0/3.2 Gen 1 (3.1 Gen 1)
USB ports quantity	6
HDMI ports quantity	3
Ethernet LAN data rates	10, 100 Mbit/s
VGA (D-Sub) input ports	1
RMS rated power	32 W
Number of built-in speakers	2
AC input voltage	100 - 240 V
Power consumption (standby)	0.5 W
Power consumption (typical)	350 W
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
Package depth	220 mm
Package width	1697 mm
Package height	1071 mm
Package weight	60001 g
Sustainability certificates	RoHS, ENERGY STAR
Certification	cTUVus, FCC, Mexico Energy, CE, CB, ErP, WEEE