ViewSonic IFP7550 Manual

Maaz Q. Page 1 of 2 Date 9/28/17
ViewSonic Corporation Rev. 3
Update PS175 for IFPxx50
Symptoms: Image flicker
This SOP is to outline the firmware update procedure to improve communication with various
graphic chipsets that currently fall outside the displays tolerance range, such as the “Intel HD530”
Only applies to units PRIOR to the serial numbers listed below
IFP6550 – V25173800001
IFP7550 – UZW173600001
IFP8650 – UZU17390001
Required equipment:
 ViewSonic IFPxx50 series display
 VPC10-WP Slot in PC (installed)
 USB flash drive
 Upgrade file “upgrade_510” (provided by ViewSonic)
Instructions:
1. Format your USB flash drive into FAT32.
2. Place folder named “upgrade_510” onto root directory of the USB drive.
Insert the USB drive into the USB2.0 port
3. Press POWER button to turn display on
4. When LED indicator turns BLUE, press and hold POWER button to prompt firmware update.
FW upgrade process will last approximately 5 minutes. During the update, the PC will make a
beeping sound. Once update completes, the display will restart and launch into Android.
Update Verification:
The display will automatically restart and launch to Android with Upgrade factory menu. Exit out
of this menu.
**Any changes made in the factory menu can result in failure or malfunction of the
ViewSonic Display. ViewSonic will not warranty unauthorized changes made within the
factory menu**

ViewSonic IFP7550 Specifications

General

Panel life	80000 h
Pixel pitch	- mm
Response time	8 ms
Display diagonal	75 \
Touch technology	Multi-touch
Display brightness	350 cd/m²
Display technology	LCD
Native aspect ratio	16:9
LED backlighting type	Direct-LED
Supported video modes	480i
Touchscreen technology	Infrared
Contrast ratio (typical)	1200:1
Display number of colors	1.073 billion colors
Active display area (W x H)	1649.66 x 927.94 mm
Supported graphics resolutions	3840 x 2160
Number of simultaneous touchpoints	20
Internal memory	2 GB
Processor cores	4
Processor model	A53
Processor family	ARM Cortex
Processor frequency	1.2 GHz
Internal storage capacity	16 GB
DVI port	-
USB version	2.0/3.2 Gen 1 (3.1 Gen 1)
USB ports quantity	8
Ethernet LAN data rates	10, 100 Mbit/s
VGA (D-Sub) input ports	1
Number of slots	2
RMS rated power	32 W
AC input voltage	100 - 240 V
Power consumption (standby)	- W
Power consumption (typical)	430 W
Product color	Black
Product design	Digital signage flat panel
Panel mounting interface	800 x 400 mm
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
Package depth	280 mm
Package width	1913 mm
Package height	1225 mm
Package weight	76000 g
Sustainability certificates	RoHS
Certification	cTUVus, FCC, MX-CoC, Mexico Energy, CE, CB, , ErP, REACH, WEEE, CCC, China Energy Label
Cables included	AC, AV, Audio (3.5mm), USB, VGA

Weight and Dimensions

Depth	99 mm
Width	1763 mm
Height	1042 mm
Weight	58500 g