ViewSonic LDS135-151 - Page 20

20
II. Unboxing Operaon
1. Aer the ight case is moved to the designated locaon, open the ight case
according to the sequence of Front Cover, Back Cover, Movable Plate and Boom
Plate. To disnguish the Front cover and Back cover, refer to the following
diagram.
Front Cover Back Cover
2. As shown below, pull the handle of the lock-ups, and rotate the handle
counterclockwise to unlock the nine (9) lock-ups connecng the Front Cover
with the Boom Plate and the Back Cover, ensuring that each lock-up will not be
interlocked.
3. Two people will need to grip the handles, as indicated by the red circles below,
and pull. While liing, keep the Front Cover level as it is moved to another
locaon.