ViewSonic LS710HD - Page 51

51
Menu Descripon
Image Sengs
Reset

Sharpness, Color, Tint, Gamma, Brilliant Color, Color
Temperature, Color Matching, RGB Gain/Bias, Color Space,
Brightness Mode) to default values.
3D
3D Mode

3D-2D
Select how the 3D content should appear on screen.
Opon Descripon
3D Display the 3D signal.
L (Le)

content.
R (Right)
Display the right frame of the 3D
content.
3D Format
Select the 3D content format.
NOTE: A Blu-ray 3D source will be detected

Opon Descripon
Auto

detected, the 3D format is selected

SBS Display in Side-by-Side format.
Top and Boom 
Frame Sequenal 
3D Sync Invert

NOTE: 
make sure your 3D glasses are for DLP-Link 3D. This projector supports
HDMI 1/HDMI 2 ports. For the

