ViewSonic LS710HD - Declaration of Rohs2 Compliance

71
Declaraon of RoHS2 Compliance





Substance
Proposed Maximum
Concentraon
Actual Concentraon
Lead (Pb) 0.1% < 0.1%
Mercury (Hg) 0.1% < 0.1%
Cadmium (Cd) 0.01% < 0.01%
 0.1% < 0.1%
Polybrominated biphenyls (PBB) 0.1% < 0.1%
Polybrominated diphenyl ethers
(PBDE)
0.1% < 0.1%
Bis (2-ethylhexyl) phthalate
(DEHP)
0.1% < 0.1%
 0.1% < 0.1%
Dibutyl phthalate (DBP) 0.1% < 0.1%
Diisobutyl phthalate (DIBP) 0.1% < 0.1%
Certain components of products as stated above are exempted under the Annex
III of the RoHS2 Direcves as noted below. Examples of exempted components
are:
• 
lamps (CCFL and EEFL) for special purposes not exceeding (per lamp):
 Short length (500 mm): maximum 3.5 mg per lamp.
 Medium length (> 500 mm and 1,500 mm): maximum 5 mg per lamp.
 Long length (> 1,500 mm): maximum 13 mg per lamp.
• Lead in glass of cathode ray tubes.
• 
• Lead as an alloying element in aluminum containing up to 0.4% lead by weight.
• Copper alloy containing up to 4% lead by weight.
• 
85% by weight or more lead).
• Electrical and electronic components containing lead in a glass or ceramic other

ceramic matrix compound.