51
(ttt.xxx.yyy.zzz: IP-Address of the projector)
If Telnet-Connection ready, and user can have RS232 command input, then Enter key
pressed, the RS232 command will be workable.
How to have TELNET enabled in Windows VISTA / 7 / 8 / 10
By default installation for Windows VISTA / 7 / 8 / 10, “TELNET” function is not included.
But end-user can have it by way of “Turn Windows features On or Off” to be enabled.
1. Open Control Panel in Windows VISTA / 7 / 8 / 10.
2. Open Programs.
To Next Page
Loading...
