53
Shutting down the projector
1. Press Power and a confirmation message is displayed prompting you.
If you don't respond in a few seconds, the message will disappear.
2. Press Power a second time.
3. Once the cooling process finishes, a "Power Off Ring Tone" will be heard. Disconnect
the power cord from the wall socket if the projector will not be used in an extended
period of time.
To turn off the ring tone, see "Turning off the Power On/Off Ring Tone" on page 43 for details.
CAUTION
• To protect the light source, the projector will not respond to any commands during the
cooling process.
• Do not unplug the power cord before the projector shutdown sequence is complete.
To Next Page
Loading...
