52
3. Select Turn Windows features on or off to open.
4. Have Telnet Client option checked, then press OK button.
Specsheet for “RS232 by TELNET” :
1. Telnet: TCP.
2. Telnet port: 4661.
(for more detail, kindly please get contact with the service agent or team)
3. Telnet utility: Windows “TELNET.exe” (console mode).
4. Disconnection for RS232-by-Telnet control normally: Close Windows Telnet utility
directly after TELNET connection ready.
Limitation 1 for Telnet-Control: there is less than 50 bytes for successive network
payload for Telnet-Control application.
Limitation 2 for Telnet-Control: there is less than 26 bytes for one complete RS232
command for Telnet-Control.
Limitation 3 for Telnet-Control: Minimum delay for next RS232 command must be
more than 200 (ms).
(*, In Windows built-in “TELNET.exe” utility, “Enter” key pressed will have
“Carriage-Return” and “New-Line” code.)
To Next Page
Loading...
