ViewSonic LX700-4K RGB - Menu Navigation

31
Menu Navigaon
The projector has mullingual on-screen display menus that allow for image and
sengs adjustment.
1. To open the On-Screen Display (OSD) Menu, press the Menu/Exit buon on the
projector or the remote control.
2. When the OSD is displayed, use the Navigaon buons (p/q) to select any item
in the main menu. While making a selecon on a parcular page, press the Enter
buon on the projector or the remote control to enter a sub-menu.
3. Use the Navigaon buons (p/q/t/u) to select the desired item in the sub-
menu and then press Enter to view further sengs. Adjust the sengs by using
the Navigaon buons (p/q/t/u).
4. Select the next item to be adjusted in the sub-menu and adjust as described
above.
5. Press Enter to conrm, and the screen will return to the main menu.
6. To exit, press the Menu/Exit buon again. The OSD menu will close and the
projector will automacally save the new sengs.