ViewSonic M1+ G2 - Power and Audio Settings

6363
Menu Descripon
Power On Source Allows the user to enter the desired source directly
aer turning on the projector.
Power On/O Ring Tone Enable or disable the power on/o ring tone.
Smart Energy Auto Power O
The projector can turn o automacally aer a set
period of me once no input source is detected.
Sleep Timer
Turn o automacally aer a set period of me.
Power Saving
Lower power consumpon if no input source is
detected aer ve (5) minutes.
NOTE: The power consumpon of the LED will
be changed to 30% aer no signal is
detected for ve (5) minutes.
harman/kardon Audio Mode
• Movie: Default audio mode.
• Music: Opmized for music playback.
• User: Allows the user to customize the audio
equalizer.
NOTE: In User mode, 100Hz, 500Hz, 1500Hz,
5000Hz, and 10000Hz can be selected.
Audio Volume
Adjust the volume from 0 to 20.
Mute
Mute or unmute the volume.