ViewSonic M1 Pro - User Manual

Questions and Answers:

M
Mary LeeJul 29, 2025
What to do if my ViewSonic M1 Pro does not turn on?
- C
  crossjoeJul 30, 2025
  If your ViewSonic Projector isn't turning on, here are a few things to check: * Make sure the power cord is securely plugged into both the projector and the power outlet. * If the cooling process is running, wait for it to complete before attempting to turn the projector on again. * Try using a different power outlet, or test the current outlet with another electrical device. * Ensure the battery has enough power or connect the power adapter. * If the projector's battery is low, it might repeatedly turn off and on. Turn it off and charge the battery for at least 30 minutes.
P
patrick97Aug 4, 2025
What to do if the ViewSonic M1 Pro remote control does not work?
- A
  Angela ChristianAug 4, 2025
  If the remote control for your ViewSonic Projector isn't working, consider these potential solutions: * Make sure there are no obstructions between the remote and the projector, and that you are within the operational range of 8 m (26 ft). * Check the batteries in the remote; they may be depleted and require replacement.
B
benjaminrochaAug 10, 2025
How to fix a ViewSonic M1 Pro when there is no picture?
- P
  plarsonAug 10, 2025
  If your ViewSonic Projector is on but you're not seeing a picture, try these steps: * Confirm that the video source cable is correctly connected and that the video source itself is powered on. * If the input source isn't automatically detected, use the Source key on the projector or remote control to manually select the correct source.
A
Annette ParkAug 17, 2025
Why is the image blurred on my ViewSonic M1 Pro and how to fix it?
- D
  Debra BoydAug 17, 2025
  If the image from your ViewSonic Projector appears blurred, try the following: * Adjust the Focus Ring to fine-tune the projection lens. * Ensure that the projector and the screen are properly aligned. Adjust the projector's height, projection angle, and direction as needed.
B
Brian VargasAug 22, 2025
What to do if ViewSonic M1 Pro is frozen?
- W
  William JohnsonAug 23, 2025
  If your ViewSonic Projector freezes and becomes unresponsive, toggle the Power Switch off and then on again to reset the device.

ViewSonic M1 Pro Specifications

General

Native aspect ratio	16:9
Projection distance	0.94 - 3.52 m
Projection technology	LED
Contrast ratio (typical)	120000:1
Screen size compatibility	40 - 150 \
Projector native resolution	720p (1280x720)
Keystone correction, horizontal	40 °
Product type	Standard throw projector
Product color	White
Market positioning	Home cinema
HDCP	Yes
Noise level	26 dB
Number of OSD languages	24
Noise level (economic mode)	25 dB
On Screen Display (OSD) languages	BEL, CHI (SIMPL), DUT, ENG, ESP, FIN, FRE, ITA, POL, POR, RUM, RUS, TUR
Offset	100 %
Throw ratio	1.07
Aperture range (F-F)	1.7 - 7.4
Service life of light source	30000 h
Power source	AC/Battery
AC input voltage	100 -2 40 V
Battery capacity	12000 mAh
Battery life (max)	2 h
Power consumption (standby)	0.5 W
Power consumption (typical)	45 W
HDMI version	1.4
HDMI connector type	Full-size
USB 2.0 ports quantity	2
Bluetooth version	4.2
Operating temperature (T-T)	0 - 40 °C